DELTA®-ADHESIVE LVC

DELTA®-ADHESIVE LVC is an emulsion, rubber-based adhesive. It is a surface preparation that increases bond strength of self-adhering membranes.

The product is California-compliant low VOC (solvent), suitable for use with self-adhering membranes such as DELTA®-VENT SA.

It can be applied to masonry, concrete, exterior grade gypsum board and metal surfaces.

DELTA®-ADHESIVE LVC is the product of choice on above-grade applications of self-adhered membranes where a quick-setting, aggressive tack, solvent-based, lower VOC adhesive is required.

Application:

  • Surfaces must be dry and free from dust, dirt, grease, oil, ice or other foreign matter.
  • Apply by brush or roller. Rollers should have a heavy nap of natural material such as lamb’s wool.
  • Allow adhesive to dry 30 minutes before applying membrane, longer under cold conditions
  • Coated surfaces not covered by membrane during the working day must be re-coated.
  • To clean up use mineral spirits. Clean hands with a waterless hand sanitizer.


Note:

  • Avoid direct application on polystyrene material.
  • Contains extremely flammable solvents. Take suitable fire precautions. Do not allow smoking or welding in working area. Keep away from open flame or spark.
  • Use under well-ventilated conditions. Avoid prolonged breathing of vapors and avoid contact with skin. Excessive inhalation of vapors can cause dizziness. Use respirator approved for organic vapor.
  • Keep containers covered when not in use.
  • Harmful if swallowed.
  • Solvent odors may taint food or other susceptible products.