DELTA®-DRAIN 2000 HI-X

The Problem

Without a proper drainage system, water can damage virtually any construction project. An improper waterproofing system that lacks a drainage system can allow hydrostatic pressure to build, making any crack in the foundation an access for water damage. 

The Solution

DELTA®-DRAIN 2000 HI-X is a drainage board that provides high compressive strength, excellent drainage capacity and exceptional long-term performance. DELTA®-DRAIN 2000 HI-X meets the requirements for light commercial applications and shallow depth foundations.  

DELTA®-DRAIN 2000
Product Details
Product Benefits
  • Composed of a high-strength, needle punched, non-woven polypropylene geotextile
  • The geotextile is fully bonded to the dimpled drainage core 
  • High performance drainage capabilities
  • Non-woven, needle-punched geotextile prevents the passage of soil particles, but allows water to pass freely, ensuring that the drainage core will not get clogged
  • Core provides a continuous path for water discharge, eliminating the potential for build-up of hydrostatic pressure
  • Geotextile is fully bonded to the drainage core, which prevents it from being pushed into the flow channels by the load from adjacent back-fill material
  • Compressive strength of 11,000 psf – can be used at installation depths of 30 ft. and more
  • One of the only drainboards on today's market made out of a special copolymer polypropylene, which is dramatically stronger than polystyrene imitators, resisting jobsite damage and rough handling
  • Unaffected by environmental stress cracking
  • Effective drainage system for underground wall construction, retaining walls, bridge abutments and as hydrostatic pressure relief layer in canal construction
  • Available in two roll sizes (4'x50' or 6’x50') 

Related Accessories

  • DELTA®-GRIP FASTENER

    DELTA®-GRIP FASTENER

    DELTA®-GRIP FASTENER is an installation aid for attachment of DELTA®-MS, DELTA®-DRAIN, and all DELTA® drainage composites.
  • DELTA®-MOLD STRIP

    DELTA®-MOLD STRIP

    DELTA®-MOLDSTRIP is a molding used to finish off the installation of DELTA®-MS and DELTA®-DRAIN at the flat tab, around windows and doors, at grade level, or at grade changes in the foundation.
  • DELTA®-SCREW FASTENER

    DELTA®-SCREW FASTENER

    DELTA®-SCREW FASTENERS securely fix drain boards to perimeter insulating boards without penetrating the waterproofing membrane. They are ideally suited for mounting DELTA®-DRAIN onto perimeter insulating panels made of XPS with a minimum thickness of 2" (60 mm).
  • DELTA®-SEALANT

    DELTA®-SEALANT

    DELTA®-SEALANT is an elastic sealing compound for installation of DELTA®-MS and DELTA®-DRAIN.